Aussie Cent MG and SB2C Helldiver 20mm models

[User_no_longer_active]

Hi all,

Can anyone tell me the correct models for the Australian Centurion tank co-ax machine-gun and the SB2C Helldiver 20mm cannon? I've checked for both on the web and have drawn a blank.
Also, I've made changes to a few OOB's and I was wondering if those changes will be undone if a new version (e.g. V3) is installed.

Thanks in advance http://forum.shrapnelgames.com/images/smilies/laugh.gif

[thatguy96]

The Centurion tanks fitted with 20mm co-ax should have been a model of the British Polsten cannon if memory serves me right. The Curtiss SB2C had four M3 cannon (sometimes written AN/M3). This was the penultimate variant of the US built variants of the Hispano HS404.

[PlasmaKrab]

Er, isn't that 20mm Polsten on the Centurion only used as ranging gun? If so, it shouldn't appear in the OOB due to limited ammo and no combat use, I guess.

[thatguy96]

No, I think it was actually meant to be a close combat weapon. Either way, it was quickly replaced on most Centurions with a 7.92mm BESA CMG.

I misread the initial post as well. The Standard Co-Ax for Aussie Centurions was the Browning L3.

[Mobhack]

It was trialled, and quickly removed with the BESA. probably too bulky, and used too large ammo.
Digger History (http://www.diggerhistory.info/pages-armour/allied/centurion.htm)

Cheers
Andy

[PlasmaKrab]

OK, got it, thanks for the correction, I guess I got it mixed up with the .50 MG. My bad.

[User_no_longer_active]

Just went to Digger History and got the info I was after...

I have to say, thanks for the quick responses!! http://forum.shrapnelgames.com/images/smilies/laugh.gif
Great community that I'm pleased to be associated with...

[User_no_longer_active]

Oh, also, I've made changes to a few OOB's and I was wondering if those changes will be undone if a new version (e.g. V3) is installed?

[thatguy96]

Yes, they will, but just make sure to save the OOBs you've modified in the custom OOB folder or somewhere else, and you'll have the changes you've made and can copy them over when V3 comes out.

[Mobhack]

Please read the GG section on the "manage OOB sets" function of the GameOptions programme, which is there to deal with/manage user mods and/or restore oficial-issue sets e.g for PBEM.

"Running WinSPMBT" link in the GG - then scroll down a bit.

Cheers
Andy

[User_no_longer_active]

Ok. Thanks! http://forum.shrapnelgames.com/images/smilies/laugh.gif

[pdoktar]

I remember there were problems with fume buildup inside the tank, when firing those 20mm coax cannons, at least it was a problem in 1950´s.