a question

[paulo]

Thanks again for a great game. If, for example, I have a large truck, a rifle squad, and a bazooka unit in the same hex how do I load these units into the truck at the same time? The carry capacity of the truck indicates it can be done. I've tried the L key and D key under "load units" but that doesn't do it. I'm sure there is a simple answer for this but I can't find it in the manual. Thanks much.

[void1984]

You should use "L" key. When loading multiple units into one carrier you have to select the unit first than press "L" and select the carrier; otherwise the carrier will unload the first unit when you wanted to load the second.

[Mobhack]

Thanks again for a great game. If, for example, I have a large truck, a rifle squad, and a bazooka unit in the same hex how do I load these units into the truck at the same time? The carry capacity of the truck indicates it can be done. I've tried the L key and D key under "load units" but that doesn't do it. I'm sure there is a simple answer for this but I can't find it in the manual. Thanks much.

Game Guide -> Deploying units. Scroll down to the box detailing the hot keys, then under that the paragraph beginning "Note on Loading and Unloading".

The L key when applied to a loaded transport is the unload key - therefore it is only useful for single unit loads onto an empty carrier, if you select the transport unit and then point to a passenger unit.

To load multiple pax :
- First select the prospective passenger (not the transport!)
- Hit L then click on the target transport to load the passenger onto it.
- Repeat process for other passengers.

Cheers
Andy

[paulo]

Thanks much for your help! Have a good day.