[Mobhack]

I've added a scaling field to the new cost calculator which will be coming out in the patch.

It is applied after the scaling factors and is an overall multiplier. Set to 1.0 by default - use 0.8 to scale the final costs to 80%, 0.5 for 50%, 1.25 for 125% etc, then hit recalculate, or load a fresh OOB and it will apply to the calculation made on OOB load.

Applies to the current calculations - so a batch calculation of all OOBS will get the same overall multiplier as set in the field in the scalings tab.

Cheers
Andy