January 13th, 2017, 09:34 PM
|
|
Second Lieutenant
|
|
Join Date: May 2012
Location: Philippines
Posts: 502
Thanks: 411
Thanked 142 Times in 102 Posts
|
|
Re: Switching spotters for artillery bombardment
Quote:
Originally Posted by Aeraaa
Quote:
Originally Posted by jivemi
Quote:
Originally Posted by Mobhack
Whichever unit you use will be the spotter from now on, if you make an adjustment. Swapping spotters has no penalty, unless you go to say a non-observer type from a proper FOO, in which case shifting costs more.
|
OK, so apparently you can't switch spotters UNLESS you make an adjustment with the new one. In which case my advice for 3) was wrong. Thanks. |
It's a common trick, I do it the whole time. Say, you have an infantry lieutentant with crappy artillery rating, being the only spotter in the area. Because of that, his call time is 2.0. But you really need arty now. So what you do is use your A0, or a dedicated FOO, who have a call time of 1.0 (I assume post 1980 situation here), and call the barrage. When the first rounds land, adjust with your infantry unit and use him for any subsequent poundings you want to make. |
Yeah, doing that more often now. AFAIK there's no penalty even if you DON'T make an adjustment; IIRC all that happens is the original spotter is maintained. So to fine-tune it, switch to the low-grade combat leader with LOS just before the rounds fall and make a slight one-hex adjustment to get greater accuracy from eyes-on. (That's what I'm thinking anyway.)
|