Crashing while changing tiny flags

[DRG]

Open the file with Shpedit

Load an ID flag you have not changed

Click on SP fix

Note the Old and New numbers will ( should ) look like this


Now go to your modified flag

Change the New numbers to the same as the old numbers that are shown here and click on Write.

DO NOT manually adjust the X/Y up/down arrows. All you should need to do is change the New "Bottom" -1 to 23 but I have NO IDEA what else you may have tried to do that might change those numbers

All of this presupposes that you built the new ID tag to the EXACT dimensions as the originals

[lukerduker123]

It worked! My issue was that I was using the up/down and left/right arrows. Doing your method worked fine. Thank you!

Example