OT: 17" CRT Monitors.. - Page 2

Thermodyne · #11 February 18th, 2004, 01:16 AM

You can get a refurb 17" from dell for 73 US right now.

mac5732 · #12 February 18th, 2004, 03:49 AM

I have a Triniton 19" and its great. I'll never go back to a 17" again. Its so much nicer, 18' viewable, for these old eyes it definitly beats a 17". Your best bet would be to just shop around and check them out in stores, or Dell has a refurbished section for monitors, computers, etc with all the same warranties, you may want to look them up on the net see what they have available... They do have good warranties

just some ideas mac

Fyron · #13 February 18th, 2004, 04:44 AM

Don't feed the beast that is Dell!

Katchoo · #14 February 18th, 2004, 05:53 AM

I'm using a 17' ViewSonic G773 that I bought about 5 years ago. I've never had any problems with it and the text display appears fine. Plus it's got 4 USB ports on the base, which is handy for mice & joysticks.

Now of course I'm talking about a model that's competely different (and older) than the one that you're thinking about getting, but it was my first & only Viewsonic purchase, and it's never given me a problem (knock on wood).

*knock*knock*

narf poit chez BOOM · #15 February 18th, 2004, 06:06 AM

Quote:

Originally posted by Imperator Fyron:
Don't feed the beast that is Dell!

oh, come on, there commercials have given me a really good bad joke to use in a D&D game that includes a druid. if the situation ever comes up.

*waits for everyone to groan*

Captain Kwok · #16 February 18th, 2004, 06:17 AM

And don't listen to Fyron about data display devices - his gamma is way too low!

David E. Gervais · #17 February 18th, 2004, 05:40 PM

here's a question about the Vertical and Horizontal Dot Pitch...

If the LG T710BH 17" Monitor has a Horizontal/Vertical size of 325mm x 244mm (Max Display) and a .24mm(H) .20mm(V) dot pitch, Does that mean the maximum possible rez for the monitor is 1354x1220? (full screen) If this is the case, then it makes sense that the monitor is rated at 1280x1024 Max Rez

Using this same formula, the ViewSonic Q71 with a .23mm(H) .13mm(V) dot pitch would have a max rez of 1413x1876. (These numbers seem off, especially in the Vertical rez.) I suspect that the dot pitch info on the Viewsonic is wrong. One thing I found is a formula to calculate the Horizontal dot pitch from a diagonal number. (In the case of the viewsonic .27mm(D) x .866 = .2338mm ( I suspect they rounded down instead of up, and as for the .13mm Vertical, I haven't found any monitor that even comes close to that so this number must be wrong too.)

Anyway, My choice is prety much made, The LG T710BH is the one I'm going to get. 1280x1024 @66hz is going to become my new 'standard display setting' (Currently I'm running at 1024x768 @60hz) So this does seem like a step up. This and the fact that I'll be moving from a bit less than 13" diagonal to 16.01" Diagonal will make me a very happy man.

Shopping for monitors is fun, I wonder what the standards will be like in 10 years when I need another new monitor.

Cheers!

tesco samoa · #18 February 18th, 2004, 09:26 PM

Hey dave have you tried www.ncix.com for monitors

or

http://www.computers-canada.com/

( for a price comparison )

tesco samoa · #19 February 18th, 2004, 09:28 PM

example for the lg

http://www.computers-canada.com/display.html?text=LG+T710BH+&table=monitor&prov=QC&limits[minprice]=&limits[maxprice]=&limits[out]=&omore=0

geoschmo · #20 February 18th, 2004, 09:35 PM

Quote:

Originally posted by Combat Wombat:
I'm never buying a flat, at least until they fix the blurring and I like the higher screen sizes that CRTs can goto.

Really? I use one at work and it's clearer then my monitor at home. Admitadly my home monitor is less then state of the art.

But I don't see any noticable blurring at work.

Quote:

Originally posted by Thermodyne:
You can get a refurb 17" from dell for 73 US right now.

Wow, that's pretty cheap.