SdKfz 251 Icons v1.0a

oragus · #1 February 28th, 2008, 03:33 PM

Here is the next installment of my icons. The SdKfz 251 series of icons. This series covers just about all of the production 251s. If I missed any they probably didn't go into production. lol. If any one has some 251s they want added to this set. Let me know, please supply your materials and I will see what I can do.

!!!To get the most recent update for this set go to the top of the second page of this thread!!!

Enjoy

thatguy96 · #2 February 28th, 2008, 05:16 PM

I think my only request would be for the SdKfz 251/20 with IR searchlight as an FO vehicle. Otherwise, they look awesome.

Pierre · #3 February 28th, 2008, 06:39 PM

Great work (as usual) oragus.

Some comments:

1)For the 251/21 I think you could make the protruding part of the 3 barrels the same length because the left and the right ones are equipped with longer cut-out flash hiders. Not sure this is the case for all versions tough.
2)I would lengthen the 75 Pak 40(L46?) a bit on the 251/22.

If you want to make other versions you still have the Czech OT-810s.

We wait for the 250s now

RecruitMonty · #4 February 28th, 2008, 08:14 PM

What scale are these? Are these done in your reduced scale or are they corrections using the games scale?

oragus · #5 March 1st, 2008, 12:44 AM

Thank you Thatguy. I have thought about the IR variant to go with my IR Panthers.

Thanks for the input Pierre. I based the barrels off the reference material I scrapped up. All the ones I found had the 2 longer barrels. Same goes for the 22. All the materials I have its pretty close to them.

As far as the Czech variant. I will have to put that on my to do list for MBT.

Thanks again for you comments.

I have the 250s done too. But a question for you. I have done the "neu" late design 250/1, should I do the other variants on that build also or the original design variants enough?

Reduced scale Monty? I have my private scale but its actually a bigger scale the 1 pixel = 5.5". I have actually started to pull away from that scale. Getting tired of monitoring 2 scales. lol

All the stuff I release on here are the 1 pixel = 6" scale, except airplanes and helos. They have their own scales I use....

Thanks fellas.

Pierre · #6 March 1st, 2008, 06:53 AM

In my opinion, with the current database, It would be useful to have the 250/8 and the 250/9 in the "neu" version.

oragus · #7 March 1st, 2008, 07:03 PM

Ok, I built them. Now just have to camo them up. I will release the 250 set next week.

RecruitMonty · #8 March 3rd, 2008, 01:04 PM

,,In my opinion, with the current database, It would be useful to have the 250/8 and the 250/9 in the "neu" version."

Agreed. Thanks for clarifying the scale. Man the old ones were big.

oragus · #9 March 3rd, 2008, 04:11 PM

Yep they were, wait till you see the size difference with the 250s.

oragus · #10 March 3rd, 2008, 10:47 PM

Thatguy,

I did the Sdkfz 251/20. Now any request for camo pattern or does it matter?